MAINBOARD GIGABYTE GA-EP35-DS3R SKT775

PROMO WEB NON VALIDA IN NEGOZIO
0100446
Intel P35 ICH9R socket 775 T, supporto per Core 2 Duo/Quad, FSB 800/1.066/1.333MHz, 4 slot DDR2 dual-channel, 1 PCI Express 16x, 3 PCI Express 1x, 3 PCI, 1x UATA, 6x SATA II RAID, Gbit LAN, 10 USB 2.0, audio dig. 8 ch, adatto per HTPC, con funzioni rispar

DISPONIBILITA' BASSA

Descrizione estesa

CPU
  1. Support for an Intel® Core™ 2 Extreme processor/ Intel® Core™ 2 Quad processor/Intel® Core™ 2 Duo processor/ Intel® Pentium® processor Extreme Edition/Intel® Pentium® D processor/ Intel® Pentium® 4 processor Extreme Edition/Intel® Pentium® 4 processor/ Intel® Celeron® processor in the LGA 775 package
    (Go to GIGABYTE's website for the latest CPU support list.)
  2. L2 cache varies with CPU
  3. 1600 (O.C.)/1333/1066/800 MHz FSB
Chipset
  1. North Bridge: Intel® P35 Chipset
  2. South Bridge: Intel® ICH9R
Memory
  1. 4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory
  2. Dual channel memory architecture
  3. Support for DDR2 1200 (O.C.)/1066/800/667 MHz memory modules
Please refer "Memory Support List" for memory support information.
Audio
  1. Realtek ALC889A codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for S/PDIF In/Out
  5. Support for CD In
LAN
  1. Realtek 8111B chip (10/100/1000 Mbit)
Expansion Slots
  1. 1 x PCI Express x16 slots
  2. 3 x PCI Express x1 slots
  3. 3 x PCI slots
Form Factor
  1. ATX (305 x 210mm)
Storage Interface South Bridge:
  1. 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices
  2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
GIGABYTE SATA2 chip:
  1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
  2. 2 x SATA 3Gb/s connectors (GSATAII0, GSATAII1) supporting up to 2 SATA 3Gb/s devices
  3. Support for SATA RAID 0, RAID 1, and JBOD
iTE IT8718 chip:
  1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
  1. Integrated in the South Bridge
  2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 4-pin ATX 12V power connector
  3. 1 x floppy disk drive connector
  4. 1 x IDE connector
  5. 8 x SATA 3Gb/s connectors
  6. 1 x CPU fan header
  7. 2 x system fan headers
  8. 1 x power fan header
  9. 1 x front panel header
  10. 1 x front panel audio header
  11. 1 x CD In connector
  12. 1 x S/PDIF In header
  13. 1 x S/PDIF Out header
  14. 2 x USB 2.0/1.1 headers
  15. 1 x parallel port header
  16. 1 x serial port header
  17. 1 x chassis intrusion header
  18. 1 x power LED header
Back Panel Connectors
  1. 1 x PS/2 keyboard port
  2. 1 x PS/2 mouse port
  3. 1 x coaxial S/PDIF Out connector
  4. 1 x optical S/PDIF Out connector
  5. 8 x USB 2.0/1.1 ports
  6. 1 x RJ-45 port
  7. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
  1. iTE IT8718 chip
H/W Monitoring
  1. System voltage detection
  2. CPU/System temperature detection
  3. CPU/System/Power fan speed detection
  4. CPU overheating warning
  5. CPU/System/Power fan fail warning
  6. CPU fan speed control
BIOS
  1. Supports DualBIOS Plus
  2. 2 x 8 Mbit flash ROM
  3. Use of licensed AWARD BIOS
  4. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b.
Unique Features
  1. Support for @BIOS
  2. Support for Download Center
  3. Support for Q-Flash
  4. Support for EasyTune
  5. Support for Xpress Install
  6. Support for Xpress Recovery2
Remark
  1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
  2. Due to most hardware/software vendors no longer offer support for Win9X/ME. If some vendors still has Win9X/ME drivers available, we will publish on website.
  3. Duo to chipset limitation, Intel ICH9R RAID driver does not support Windows 2000 operating system.

Features

 <<